The internals of the Meade LX200gps GPS receiver lump


GPS Power and Signals connect to a board at the bottom of the left fork access.
The larger grey flat cable goes to the level sensor.


If you open the GPS unit, this is the top side of the card, with the temperature sensor chips and GPS antenna (top).


The underside of the GPS card, showing the Sony CXD2931R-9 processor, the Ricoh 313 external clock (small black chip, lower left), the Rakon 14.447 GHz RF (radio frequency) unit (silver can), and a crystal (between the above two).

Dick Seymour
autostaretx